Table of Contents
Advertisement
Description
Rear I/O module
3
PCIe riser filler
4
PCIe filler
5
PCIe riser
6
PCIe adapter
7
GPU air duct
8
Flash power module
9
Fan
10
Power distribution board
11
Internal CFF RAID adapter
12
M.2 boot adapter
13
M.2 heat sink
14
M.2 drive
15
M.2 drive retainer
16
Memory module
17
Power cords
Several power cords are available, depending on the country and region where the server is installed.
To view the power cords that are available for the server:
1. Go to:
http://dcsc.lenovo.com/#/
2. Click Preconfigured Model or Configure to order.
3. Enter the machine type and model for your server to display the configurator page.
4. Click Power ➙ Power Cables to see all line cords.
Notes:
• For your safety, a power cord with a grounded attachment plug is provided to use with this product. To
avoid electrical shock, always use the power cord and plug with a properly grounded outlet.
• Power cords for this product that are used in the United States and Canada are listed by Underwriter's
Laboratories (UL) and certified by the Canadian Standards Association (CSA).
• For units intended to be operated at 115 volts: Use a UL-listed and CSA-certified cord set consisting of a
minimum 18 AWG, Type SVT or SJT, three-conductor cord, a maximum of 15 feet in length and a parallel
blade, grounding-type attachment plug rated 15 amperes, 125 volts.
• For units intended to be operated at 230 volts (U.S. use): Use a UL-listed and CSA-certified cord set
consisting of a minimum 18 AWG, Type SVT or SJT, three-conductor cord, a maximum of 15 feet in length
and a tandem blade, grounding-type attachment plug rated 15 amperes, 250 volts.
• For units intended to be operated at 230 volts (outside the U.S.): Use a cord set with a grounding-type
attachment plug. The cord set should have the appropriate safety approvals for the country in which the
equipment will be installed.
• Power cords for a specific country or region are usually available only in that country or region.
Type
Description
T1
MicroSD card
20
T1
Firmware and RoT security module
21
T1
2.5-inch drive filler
22
T2
15 mm 2.5-inch drive
23
T1
7 mm 2.5-inch drive
24
T1
System board
25
T1
2.5-inch drive backplane
26
T1
Front I/O board
27
T2
Node tray
28
T1
Screws
29
T1
Cables
30
T2
Heat sink
31
T1
Power bus bar
32
T1
Cable walls
33
T1
Flash power module holder
34
Type
T1
F
T1
T1
T1
F
T1
T1
F
T1
T1
F
T1
T1
T1
.
Chapter 3
Parts list
41
Advertisement
Table of Contents
