Smeg LB86 Instructions For Use Manual page 17

Interruptions
any alien objects from the door gasket.
•
Leave the door ajar to allow the interior to dry.
•
Close the water inlet faucet.
•
Switch the machine off by turning the program
selector to position "0".
•
By the user
Selecting PUMP STOP function
Program is stopped when it comes to the PUMP
STOP stage (drum door remains closed all the
time). Indicator LED above the knob (E) starts
flashing. Washing procedure is continued by
pressing the START knob (F).
Own (physical) interruption
You may stop the program by turning the program
selector to the position "0". If there is water in the
drum select one of additional programs (pumping,
spinning) to empty the water and terminate the
program.
PAUSE knob
By pressing the PAUSE knob (F) program may
be suspended at any time. After certain time you
may open the door if there is no water in the drum,
otherwise this is not possible. Program is continued
by pressing the START knob (F).
•
Failures
Program is suspended in case a failure occurs.
Signal LED's are flashing and sound signal is
heard (see cf. Failures).
•
Power failure
If a power failure occurs the washing program is
interrupted, and when the power is restored the
program is automatically resumed where it had
been interrupted.
17