Contents Specifications of your Washing Machine Warnings Installation Preparation Program Selection and Operating Your Machine Maintenance and Cleaning > 4 > 5 > 6 > 8 > 9 > 13...
Specifications of your Washing Machine Maximum dry laundry capacity Height Width Depth Net Weight Electricity Total Current Total Power Washing -rinsing cycle Spinning cycle In order to improve the product quality, modifications can be made in the specifica- tions without prior notice. The illustrations in this guide are schematic and may not exactly match with your product.
Warnings • This product is designed for home use. • Your washing machine is adjusted to 230V. • If the fuse in your house is less than 16A than have a certified electrician deploy an 16A fuse. • In case of transformer or non-trans- former use, grounding installation must be performed with a licensed electrician.
Installation 1. Removing the packaging reinforcements To remove the packaging reinforcement lean the machine backward, take the reinforcement by pulling from the braid. 2. Removing the transportation safety bolts Before operating the machine, the transportation safety bolts must definitely be removed. For this, 1.
Water connections a) Water inlet hose The specific hoses that come with the machine are connected to the water inlet valves on the machine. Red labeled hose is for hot water inlet and blue labeled hose is for cold water inlet. In order to prevent the water leakages that may occur on the connection points, rub- ber seals are placed on the hose or in the...
Electrical Connection Plug in the grounded plug at the end of the power cable of the washing machine to a grounded wall outlet which is fed with suitable voltage and current. Preparation • Please note the followings before start ing to wash your laundry: - Have you plugged the machine? - Have you connected the drainage hose as necessary?
Put the powder detergent and softener into the appropriate compartments in the detergent drawer and close the deter- gent drawer. Pour the softener as recommended in the package (generally <100ml; i.e. 1 tea cup) Never exceed the “MAX” marking. If you put more, it will mix into the washing water via siphon (III) and it will be wasted.
Pressing the “On/Off” button never means that the program is started. You must press “Start/Pause/Cancel” button in order the machine starts its program. Program selection table Determine the suitable program accord- ing to the type, amount, dirtiness level and washing temperature of the laundry by looking at the program selection table.
Function Selection Additional functions selectable accord- ing to selected program can be selected by pressing related key. Led of selected function will be on. If not selected together some additional functions go off when it is not selected with other one. For example; when using Auxiliary Functions Quick wash Shortens washing time for lightly soiled...
Cotton40 can be used. For selecting Cotton40 instead of Cotton60 by press- ing “Start/Pause/Cancel” key machine is switched to pause position. Program knob is turned for selecting Cotton40 program. Even when the program selection knob Adding laundry If you want to add laundry to your machine after program begins press Start/Pause key for switching machine to pause mode.
Maintenance and cleaning Detergent Drawer The powder detergent remnants may accumulate in the detergent drawer. To clean the detergent drawer, pull the drawer towards you by pressing the marked point of the siphon in the softener compartment as shown in the illustration. Wash the drawer in the sink with plenty of water.
Hose Since there is a risk of freezing especially in the cold areas, the water remaining in the appliance can frozen and damage the appliance. In this case, the water remaining in the pump and hoses should Cleaning the pump filter •...