Smeg LB86 Instructions For Use Manual page 11

Washing procedure
Washing machine
operation
•
Open the door of the machine.
•
Load the laundry into the drum.
•
Close the door.
•
Open the water inlet faucet.
•
Push the ON/OFF button and select the program.
•
Add washing and treatment agents (detergent and
softener).
•
Start the operation by pushing the START knob (F).
- Open the door of the machine.
Door is opened by pulling the handle (lever) on the
right hand side of the door towards you.
- Sort the laundry by the type of fabrics.
Do the buttons and zippers, tie the strings
and pull out the pockets.
Very delicate laundry should be put in a
special protective sack.
It is suggested to load the drum with items
of different sizes.
Pay attention to the labels on the clothes,
indicating the recommending washing
mode (see table of textile treatment
symbols on the last page of these
instructions).
- Load the laundry into the drum.
Check that the drum is empty.
- Close the door of the appliance.
- Open the water inlet faucet.
- Push the ON/OFF button and select washing
program.
Program is selected by turning the program selector
(A) from the "0" position to the desired washing
program. The ON/OFF signal LED indicating
particular washing stage for the chosen program
starts flashing. The program selector (A) may
be turned in both directions, and the appropriate
11