Smeg LB86 Instructions For Use Manual page 13

Manual wash
Very gentle program concluded with short gentle
spin (max. 400 RPM).
It is suitable for washing fabrics from flax, silk, wool
or viscose, marked accordingly for manual wash.
Cold wash
Washing program for lightly soiled laundry of mixed
fabrics (mixed quality of fabrics).
- Selection of additional function
( , , , ,)
Additional functions alter the basic washing cycle
procedure.Particular function is switched on
by pressing the relevant knob. The selection is
confirmed with sound signal and switching on the
signal LED above the selected function. If certain
function is not available for the selected program,
signal LED will not illuminate.
The function is switched off by pressing the same
button again - signal LED goes off.
Select the particular function after the
selection of the basic program, but prior
pressing the START button (F).
Pump stop
•
This function is switched on after the selection of
a basic program by pressing the knob (E). It may
also be switched on during the operation, prior
last rinse. Indicator LED above the washing cycle
symbol is lit.
•
The program stops at the end of last rinse, prior
spinning: laundry remains soaked in water and
prevents crease, if you are unable to remove
it from the drum immediately after the end of
washing cycle.
•
Indicator LED above the knob is flashing.
•
The selected program is completed by pushing
the START button (F), but you may also apply
13