Smeg LB107 Instructions For Use Manual page 23

Table of Contents

Advertisement

Failure
The machine does not
work
(display is not
illuminated).
Water does not enter
the machine.
The machine moves
during operation.
The machine vibrates
during the spin.
Excessive foaming
during washing.
Laundry is not properly
spun.
No failure is reported.
Greasy wads appear
on the laundry.
Unpleasant smell in
the washing machine
drum.
Laundry is stained
after washing.
White powdery
residues on the
laundry.
Detergent residues in
the dispenser.
Possible cause
Machine is not powered.
Filter is not tightly screwed in.
Inlet pipe is not tightly screwed
to the machine or to the water
faucet.
Outlet pipe fell to the fl oor.
The machine is not properly
leveled.
Transport brackets are not
removed.
Unevenly distributed laundry,
especially with very small
quantities (for ex. only the
bathrobe).
Excessive measure of detergent.
The machine switched on the
UKS* function. Because of bad
laundry balance, the machine has
automatically reduced spin RPM.
Too little detergent (laundry was
very greasy).
Remains of fabrics, washing
agent and softener in the fi lter.
You used liquid detergent or
detergent for colored laundry
which does not contain whitener.
You selected inappropriate
program.
It is not the consequence of bad
rinsing, but because of neo-
phosphate detergents containing
non soluble components
(zeolites) for water softening.
Such substances may be
deposited upon the laundry.
Inappropriately selected program.
Low water fl ow pressure.
Some detergents may stick to the
dispenser rather hard if it is wet.
Remedy
Check if:
• plug is in the socket,
• there is power in the socket,
• the fuse is OK.
Tighten the fi lter properly.
Tighten the inlet pipe.
Affi x the outlet pipe to the drain.
Level the machine with the adjustable
legs.
Remove transport brackets.
This is normal, the machine will
reduce the RPM if vibrations are
too strong. Wash larger quantity of
laundry.
Use washing powder according to
the instructions by the producer and
according to the water hardness and
soiled laundry.
Use only detergents for machine
washing.
The machine operates normally. Wash
large and small pieces of laundry
together.
Wash the laundry again.
Add more detergent for such soiled
laundry, or use liquid detergent.
Check whether the fi lter is clean.
Use the detergent containing whitener.
Select the heavily soiled laundry
program, or activate soaking function.
• Immediately rinse the laundry once
again.
• Use liquid detergents which do not
contain zeolites.
• Try removing the residues with the
brush.
• Use program for heavily soiled
laundry, or activate soaking function.
• Clean the inlet pipe screen.
• Wipe the dispenser prior loading
detergent.
23

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lb127Lb127x

Table of Contents