Smeg LB107 Instructions For Use Manual page 12

12
are displayed in sequence. If you do not wish to activate or
change certain displayed function, press knob B (MENU) to
move to the next available function.Functions with the choice
of multiple available settings, display the default one in bold
(spin RPM, extra rinse, more water, sound signal). Using the
SELECTION knob (C) you may change settings. Activation of a
particular function is confi rmed by the relevant symbol appearing
on the display. Function is deactivated by another pressing the
SELECTION knob (C).
Reduced spin RPM /
Best recommended spin RPM for the selected program appear on
the display. Using the button (C) in some models you can increase
the selected RPM (1300-1800) or reduce in steps till "0", when all
spins are off. Last selection is "pump stop" meaning that laundry
will remain soaked in the last rinse water.
RINSE HOLD function is selected if you want the laundry not to be
excessively creased in case you are unable to remove it from the
drum immediately after the end of washing cycle. This is specially
handy for washing of synthetics
However, it is not recommended for wool
Extra rinse/ Clean water sensor
This function is for persons, especially sensitive to detergents.
Using the SELECTION knob (C) you may select one or two extra
rinses, or activate the Clean water sensor (S) - certain models
only. By activating extra rinse the display indicates adequately
increased quantity of water. If the clean water sensor is activated,
the display indicates the symbol "S" instead of water quantity. In
such cases the machine will select appropriate number of rinses
in relation to how clean is rinsing water, detected (measured) by
the sensor.
Higher water level (Water plus)
For washing heavily stained laundry.
Using the SELECTION knob (C) you may increase quantity of
water for rinsing one or two times more; for certain programs
this function is available also for washing. Appropriately larger
quantity of water is indicated by the display.
Cold wash
For washing less soiled or colour-sensitive clothes.
Upon switching this function ON, the heating function of this
cycle is switched OFF, therefore the whole program is adequately
shortened.
Each temperature related to a particular program (wool, cotton,
delicates, etc.) corresponds to a particular period of cold wash.
To select the desired program use knob B and select the cold
Rinse hold
and delicate laundry
or manual wash
.
.