Smeg LB107 Instructions For Use Manual page 14

14
In case you wish to change or suspend the delayed start after
starting the machine with the START knob (F), you may do so by
pressing the MENU knob (B). The delayed start appears; using
the SELECTION button (C) reset the delay period.
End of program
(certain models only)
Caution: prior this setting check whether the current time of day
is set correctly (see section Special functions). Set the time you
want the program to end the washing procedure.
The machine will automatically calculate the starting time,
depending on the selected program. End of washing may be
delayed for maximum 20 hours, in 30 minute intervals for the fi rst
two hour delay, and in hourly intervals for the rest.
Function is set by pressing or keeping pressed the SELECTION
knob (C) until the required time to end the washing appears on
display.
Caution: If Clean water sensor is engaged, the program may
last longer for extra rinsing time.
In case you wish to change or suspend the end of washing time
after starting the machine with the START knob (F), you may
do so by pressing the MENU knob. The end of washing time
appears; using the
SELECTION button (C) reset the selected time.
Sound signal
Sound signal beeps when a knob is pressed (function selection), and
it also signals the end of washing program and reporting failures.
In default setting the sound signal is on. You may select to switch the
sound signal off, or increase volume.
Legend: sound signal off
normal sound signal setting
increased volume setting
If you switch the sound signal off the display indicates relevant
symbol .
Child protection
Operation of the washer may be protected against accidental
changes of programs or functions. The function is activated by
pressing the START/PAUSE button (F).
Temporary disengagement of the function (during the operation):
- Keep the MENU knob (B) pressed for 4 seconds, relevant
symbol fl ashes on the display.
- Stop the program by pressing the START/PAUSE knob (F).
- Change settings.