Smeg LB107 Instructions For Use Manual page 16

Start the operation Start the operation
16
- Adding washing and softening agents
(see tips for washing and energy saving)
• pre-wash compartment
• main wash compartment
• softener compartment
If you do not apply the program which includes the pre-wash
feature, you may add washing detergent directly into the drum,
using the measuring vessel.
When adding softener, be careful to fi ll the dispenser
only up to the marked level.
Be sure to close the detergent dispenser when
opening/closing the appliance door.
Program is activated by pushing the START/PAUSE button
(F). Sound signal confi rms the start, the display indicates fi rst
washing stage and time left to the end of washing. Washing
stages are consecutively displayed in accordance with the
selected program.
If the machine is set with the delayed start, it will start operating
after the delay time expires.
If the pump stop function was set, the program will stop at the
fi nal rinse and the display indicates fl ashing sign pump stop
(RINSE).
You may conclude the program by pressing the START knob (F)
and the machine will fi nish the program with the spin, determined
by that particular program.
In case you would like to alter the washing program, turn the
program selector to the position "0", followed by the selection of
rinse or merely pumping the water out.
Low water temperature, low network voltage, and
smaller loads of laundry may extend the washing time;
the time indicated on the display is constantly adjusted
to account for such conditions.