Statistic Functions - Culligan Platinum Plus Series Owner's Manual

Platinum plus series automatic water conditioner
Table of Contents

Advertisement

Statistic
Functions
24
The statistical functions are reached by pressing the "Information" key. Repetitive presses of the
"Statistics" key will cycle through the standard statistics mode until cycled back to time of day
display.
Once either of the Information menus is entered the information shown for each display is
outlined below:
Aqua Sensor - This display will only show when in aqua sensor mode (no meter attached).
The display will alternate between 'aqua' and 'sensor' every second until the 'Information'
key is pressed or until the function times out.
AQUA
Flow Rate - This display will only show if the flow
meter is attached to the control. The display shall
show the current flow rate of the water passing
through the control. The display will show the "FLOW
RATE" and "GPM" icons and the current flow rate
passing through the flow meter for as long as the "-"
key or "Information" key is not pressed.
This display shall never time out, as opposed to the rest of standard statistics (10 minutes).
Capacity Remaining (%)(standard statistics)
- This display will only show if the flow meter is
attached to the control. The display shows the percent
capacity remaining before regeneration will be
triggered. The display will show the "SOFTWATER",
"REMAINING" and "%" icons. This display shall
never time out, as opposed to the rest of standard
statistics (10 minutes).
Today's Water Usage - This display will only show
if the flow meter is attached to the control. The display
will show the accumulated flow of water for the current
day. The value is to start totalizing at 12:00 AM and
reset to 0 at 11:59:59 PM. The display will show the
"TODAY'S", "WATER USAGE" and "GALLONS" icons
and the total days flow.
Average Daily Water Usage - This display will
only show if the flow meter is attached to the control.
The display will show a running 7-day average of
daily water usage. The display will show the "AVG
DAILY", "WATER USAGE" and "GALLONS" icons
and the averaged flow value.
SENS OR
00 5.6
FLOW RATE GPM
0 47
TODAY'S
WATER USAGE
1 87
GALLONS
AVG DAILY
WATER USAGE
02 13
GALLONS
SOFT WATER
REMAINING
%

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Platinum plus 14"Iron-cleer plus

Table of Contents