Culligan Platinum Plus Series Owner's Manual page 17

Flow Control Eductor Nozzle
Listed below is the recommended eductor nozzle to be used at various salt dosages.
Tank Injector
10 x 54 1 - white
12 x 52 1 - white
14 x 65 4 - green
16 x 65 4 - green
Refer to Figure 6 for a visual on changing the eductor nozzle and the backwash flow control.
Drain Elbow
Flow Control
Drain Clip
Injector Clip
Eductor Nozzle Replacement:
• Remove the injector clip on the eductor cap and remove the cap.
• Remove the injector assembly.
• Remove the injector screen from the assembly
• Remove the injector assembly that is shipped inside the control and replace it with the proper
assembly as per Table 2.
• Reverse the procedure to reassemble.
Draw Rate DLFC (gpm)
0.38
0.38
0.78
0.78
Table 2 - Flow Restrictors
Injector Cover
Injector Assembly
Injector Screen
Brine Clip
Brine Fitting
Tube Ferrule
Brine Fitting Nut
Figure 6
BLFC (gpm)
2 0.25
3.5 0.25
5.0 0.50
6 0.50
Tube Insert
Installation
(cont.)
13