User Manual V1.1-2022-08-01
8
System Commissioning
8.1 Indicators and Buttons
Indicator
Power
Operating
Faulty
8.2 Setting Inverter Parameters via LCD
•
Inverter firmware version shown in this document is V1.00.00. Coummunication version: V1.00.
The screenshots are for reference only. The actual interface may differ.
•
The name, range, and default value of the parameters are subject to change or adjustment. The
actual display prevails.
•
To prevent the generating capacity from being influenced by wrong parameters, the power
parameters should be set by professionals.
LCD Button Description
Stop pressing the button for a period in any page, the LCD will get dark and go back to the initial
page, which means the parameter in that page has been saved successfully.
Status
ON = WiFi is connected/active.
BLINK 1 = WiFi system is resetting.
BLINK 2 = WiFi not connect to the router.
BLINK 4 = WiFi server problem
BLINK = RS485 is connected.
OFF = WiFi is not active.
ON = The inverter is feeding power.
OFF = The inverter is not feeding power at the moment.
ON = A fault has occurred.
OFF = No fault.
Description
NOTICE
29
System Commissioning