Set Up Your Development Environment - ICP DAS USA WISE-2841M Getting Started Manual

ICP DAS WISE User Manual

4 Set up your Development Environment

When WISE is powered on, please wait about one minute to complete the start-up
procedure. When the "RUN" LED starts flashing, it represents the boot is complete,
the connection can be started.
Modify WISE's network settings to fit current network environment settings, and the
default network settings of WISE is as follow:
LAN1：DHCP
LAN2：
 IP：192.168.255.1
 Subnet mask：255.255.0.0
 Gateway address：192.168.0.1
 DNS Server address：8.8.8.8 (default: Google DNS Server)
Users can connect to the WISE controller through LAN1 or LAN2. The procedures
are as following:
Steps for LAN1
(1) Connect WISE's LAN1 to the network environment with DHCP server.
(2) Search the WISE controller and obtain its assigned IP through the
WISE-284x
document via the following links:
https://wise.icpdas.com/downloads/utility/WISE-284x%20Utility%20v1
.0.0%20Setup.msi
https://wise.icpdas.com/downloads/manual/WISE-284x%20Utility%20
Quick%20Start_v1.0.0_EN.pdf
(3) Open the browser and enter the IP of the searched WISE in the address bar.
(4) Successfully connect to the WISE website to start the operation.
Steps for LAN2
(1) Modify the network settings of the PC or Notebook to be the same network
segment as WISE. For example:
 IP：192.168.255.10
 Subnet mask：255.255.0.0
 Gateway address：192.168.0.1
(2) Connect WISE LAN to PC by network cable. (WISE is capable of
http://wise.icpdas.com
Utility.You can download WISE-284x Utility and the quick start
9