Switching on and off
Before using for the first time
Remove all packaging material and
protective film.
Clean the inside of the appliance and
the accessories (see "Cleaning and
care").
Connecting the refrigeration appliance
Connect the refrigeration appliance to
the electricity supply as described in
"Electrical connection".
will then appear on the appliance
Miele
display, followed by .
Filling and inserting the water
container for the humidifier
Fill the water container for the
humidifier with fresh drinking water
(see "Storing food in the PerfectFresh
Active zone – Humidity-controlled
compartment").
Place the water container in the
dividing plate between the refrigerator
section and PerfectFresh Active zone
(see "Storing food in the PerfectFresh
Active zone – Humidity-controlled
compartment").
38
Switching the refrigeration
appliance on
Open the appliance door.
Tap on the display.
The refrigeration appliance will start to
cool and the interior lighting will come.
When the set freezer temperature is
reached, the
symbol disappears, the
temperature display of the freezer
section lights up constantly and the
alarm stops.
If the alarm annoys you, tap
The alarm will stop.
The refrigeration appliance will gradually
reach the pre-set temperatures.
To enable the temperature to get
sufficiently cold inside the
refrigeration appliance, allow the
appliance to run for a few hours
before placing food in it. Do not place
food in the refrigeration appliance
until it has reached the preset
temperature.
Do not place food in the freezer zone
until it has reached the preset
temperature (min. -18 °C).
.