Table of Contents
Advertisement
Installation
Fitting supplied wall spacers
The wall spacers supplied must be
used in order to achieve declared
energy consumption values and to
prevent the build-up of condensation
at high ambient temperatures. The
refrigeration appliance depth is
increased by approx. 15 mm for
appliances with wall spacers fitted.
If the wall spacers are not used, the
functionality of the refrigeration
appliance is not affected. Energy
consumption is only slightly increased
with less distance between the
appliance and the wall.
Fit the wall spacers onto the back of
the refrigeration appliance on the
bottom left and right.
18
Setting up the refrigeration
appliance
Risk of injury and damage due to
the refrigeration appliance tipping
over.
There is an increased risk of injury
and damage if the refrigeration
appliance is installed by a single
person.
Two people are required for installing
the refrigeration appliance.
Risk of damage and injury caused
by appliance door impact.
The appliance door could hit the wall
of the room resulting in damage to
the door. If the door is made of glass,
the damaged glass can lead to
injuries.
Fit the door opening angle limiter
supplied before the refrigeration
appliance is installed.
Protect the appliance door by fitting a
felt stopper, for example, to the wall
of the room.
Risk of damaging the floor.
Moving the refrigeration appliance
can cause damage to the floor.
Move the refrigeration appliance
carefully on floors that are sensitive
to scratching.
For easier installation, there are
transport handles on the back at the
top and transport wheels underneath
the refrigeration appliance.
Tip: The refrigeration appliance must be
empty when it is installed.
Prepare the refrigeration appliance for
installation as close as possible to its
intended installation site.
Advertisement
Table of Contents
