Table of Contents
Advertisement
Cleaning and care
- Adapters for the split shelf
- The glass shelves (without protective
trims)
- The holder for the charcoal filter
(available as an optional accessory)
Removing and dismantling
accessories for cleaning
Removing the door shelf with fine
adjustment
Hold the door shelf in both hands,
press the grey buttons on both sides
under it and slide it up off the guide
rails.
Remove the guide rail from the lugs.
Once you have cleaned it, move the
guide rail to the desired position and
place the second guide rail parallel to
the first rail on the opposite side.
Push the shelf back down onto the
guide rails.
Dismantling the door shelf/bottle shelf
Remove the stainless steel trim before
cleaning the door shelf/bottle rack in a
dishwasher.
To remove the stainless steel trim,
proceed as follows:
Place the door shelf/bottle rack on
the worktop.
68
Press the latch out of the recess. The
entire section of stainless steel trim
will now come off the shelf.
After cleaning, reattach the stainless
steel trim to the shelf by following the
same procedure in reverse.
Dismantling the adjustable shelf/
adjustable shelf with lighting
Risk of damage as a result of
incorrect cleaning.
The stainless steel trim with LED
lighting will be damaged if you place
it in water for cleaning.
Clean the stainless steel trim with
LED lighting with a damp cloth.
Remove the stainless steel trim or
stainless steel trim with LED lighting
before cleaning the adjustable shelf.
Place the adjustable shelf on a
worktop covered with a soft material
(e.g. a tea towel) with the top side
facing downward.
Advertisement
Table of Contents
