Table of Contents
Advertisement
Adjusting the interior fittings
Using the door shelf fine adjustment
Use the fine adjustment if you need
greater height clearance on the door
shelf/bottle shelf.
You can change the height of the door
shelf while it is loaded.
Hold the door shelf in both hands,
press the grey buttons on both sides
under it and move it.
Repositioning the door shelf with fine
adjustment
Only move the door/bottle shelves in
the appliance door when they are
empty.
Take hold of the sides of the door
shelf with both hands so that you are
touching each of the grey buttons
underneath it.
Guide to the appliance
Press the grey buttons at the same
time and slide the door shelf up and
off the guide rails.
Remove the guide rail from the lugs
and move it to the desired position.
Move the second guide rail parallel to
the first rail.
Push the shelf down onto the guide
rails.
Moving the door shelf/bottle shelf
Only move the door/bottle shelves in
the appliance door when they are
empty.
Push the door/bottle shelves
upwards, then remove them by pulling
them forwards.
Replace the door/bottle shelves at
the required height.
Clipping the egg trays on
Clip the egg trays onto the rear edge
of the door shelf.
Adjusting or removing the bottle
holder
The non-slip fins of the bottle holder
make bottles more secure when you
open and close the appliance door.
33
Advertisement
Table of Contents
