Levelling The Appliance; Rear Top Skirtboard - John Lewis JLRCBK105 Instruction Manual

Levelling the appliance

After making the electrical and/or gas
connections, level the appliance on the floor
by means of its four adjustable feet. First
insert the front feet and then the rear feet.
The appliance must be properly levelled to
ensure better stability. Screw or unscrew
the bottom part of the foot until the
appliance is stable and level on the floor.
Caution! To prevent possible
damage to the appliance, we
recommend to screw first the
front feet and then the rear ones.
Rear top skirt
Caution! Always install the rear
top skirt which is an integral part
of the appliance.
1 Loosen the 4 screws (A) on the back of
the worktop (2 for each side).
2 Place the skirt above the worktop, taking
care to align the skirt's slots (B) with the
screws (A).
3 Secure the skirt to the worktop by
tightening screws (A).
29