Adaptation To Different Types Of Gas - John Lewis JLRCBK105 Instruction Manual

then tighten the adapter B to it as indicated
in the figure. Screw the assembly to the
moveable connector A of the appliance,
placing the seal C between them.
When making the connection, make sure
that no stress of any kind is applied to the
cooker and that the hose does not touch any
sharp edges.
If connecting to LPG the bayonet hose must
have red bands on it.
Adaptation to different
types of gas
Warning! Before performing
any cleaning or maintenance
work, disconnect the appliance
from the mains.
The cooker hob is preset for natural gas G20
(2H) at a pressure of 20 mbar. In the case of
operation with other types of gas the burner
nozzles must be changed and the minimum
flame adjusted on the gas taps.
Replacement of nozzles on the
hob
To change the nozzles, proceed as described
below:
1 Extract the grids and remove all the caps
and flame-spreader crowns;
2 Unscrew the burner nozzles with a 7 mm
socket wrench;
3 Replace the nozzles according to the type
of gas to be used
4 Replace the burners in the correct
position.
27