John Lewis JLRCBK105 Instruction Manual page 23

Warning! before removing the
glass panels, make sure that at
least one of the door's hinges has
been locked in the open position
as described in chapter
"Removing the door". This
operation may have to be
repeated during the glass removal
process if the door is accidentally
freed.
1 Remove the internal glass panel by pulling
the rear part gently upwards, following the
movement indicated by the arrows (1).
Then pull the front of the glass panel
upwards (2). Doing this detaches the 4
pins attached to the glass from their slots
in the oven door.
2 An intermediate glass panel may be
present; if so, remove it by lifting it
upwards.
3 It is now possible to clean the external
glass panel and the panels removed
previously. Use absorbent kitchen roll. In
the case of stubborn dirt, wash with a
damp sponge and neutral detergent.
4 Replace the panes in the opposite order to
which they were removed. Reposition the
internal glass panel, taking care to centre
and insert the 4 pins attached to the glass
into their slots in the oven door by
applying slight pressure.Replace the panes
in the opposite order to which they were
removed.
23