Removing The Door; Oven Door Seal; Removing The Internal Glass Panels - John Lewis JLRCBK105 Instruction Manual

Removing the door

1 Open the door completely. Insert a pintle
into the hole in the hinge. Repeat for both
hinges.
2 Grasp the door on both sides with both
hands, lift it forming an angle of around 30°
and remove it.
3 To reassemble the door, put the hinges in
the relevant slots in the oven, making sure
that grooved sections A are resting
completely at the base of the slots. Lower
the door and once it is in place remove the
pins from the holes in the hinges.
Caution! Take care when
removing the doors, they can be
heavy.

Oven door seal

To permit thorough cleaning of the oven,
the seal may be removed.
Once the door has been taken off, lift the
tabs at the corners as shown in the figure.
Removing the internal
glass panels
The glass in the door should always be kept
thoroughly clean. To facilitate cleaning, it is
possible to remove the door (see Removing
the door) and place it on a canvas, or open
it and lock the hinges in order to extract the
glass panels. The glass panels of the door can
be completely removed by following the
instructions provided below.
22