Table of Contents
Advertisement
5.7.5.2 Privacy Masking
You can mask certain areas of the video image for privacy protection.
Procedure
Select Main Menu > CAMERA > Overlay > Privacy Masking.
Step 1
Step 2
Select a channel.
Step 3
Click
Click Add, select the masking type and color, and then draw mosaic or color blocks in the
Step 4
image as needed.
A masking block appears on the video image.
The number of masking blocks that you can add might differ depending on the
●
camera. You can add up to 24 masking blocks.
Click Clear to delete all masking areas. Click
●
Step 5
Drag the masking block to a desired position and then configure the type, color and other
parameters.
Click Apply.
Step 6
5.7.6 Configuring Encoding Settings
You can set video bit stream and image parameters.
Figure 5-71 Privacy masking
to enable privacy masking.
194
User's Manual
to delete a masking area.
Advertisement
Table of Contents
