Configuring P2P Settings; Enabling P2P Function - Dahua DHI-NVR608R-64-4KS2 Quick Start Manual

Parameter
Period
Copy to
Step 3 Set the schedule by drawing or editing.
● Drawing: Press and hold the left button of the mouse and drag the mouse to draw
the period.
● Editing: Click
Step 4 Click Apply.
The configured record schedule can come into effect only when the auto record
function is enabled. For details to enable auto record, see User's Manual.

1.6 Configuring P2P Settings

You can use the QR code to connect a smart phone to the NVR for management.
Make sure that the NVR has been connected to the Internet, and if yes, in the Status box of
the P2P interface, it shows Online.

1.6.1 Enabling P2P Function

You need to enter P2P interface to enable P2P function and scan the QR code to download
the smart phone application.
Step 1 Select Main Menu > NETWORK > P2P.
Step 2 Click Enable to enable P2P function.
Description
Defines a period during which the configured recording setting is
active.
The system only activates the alarm in the defined period.
Click Copy to to copy the settings to other channels.
to configure the period and then click OK.
Figure 1-18 P2P
17