5.10.3 Alarm Input
Procedure
Select Main menu > ALARM > Alarm-in Port.
Step 1
Step 2
Click each tab to configure alarm input settings.
Local alarm: After connect the alarm device to the NVR alarm input port, the system
●
performs alarm linkage actions when there is an alarm signal from the alarm input port
to the NVR.
If the camera has the capability of camera audio and remote warning light, it supports
configuring on the local alarm page, and the configuration is synchronized with the
configuration on the camera.
Alarm box: You can connect the alarm box to the RS-485 port of the Device. When the
●
alarm is detected by the alarm box, the alarm information will be uploaded to the
Device, and then the Device performs alarm linkage actions.
Network alarm: NVR performs alarm linkage actions when it receives the alarm signal
●
via the network transmission.
IPC external alarm: When the peripheral device connected to the camera has triggered
●
an alarm, the camera uploads the alarm signal to the NVR via the network
transmission. The system performs the corresponding alarm linkage actions.
Figure 5-206 Alarm status
328
User's Manual