Step 2
(Optional) Set Enhancement Mode to On or Off.
When enhancement mode is enabled, the transmission distance of the PoE port will be
extended.
Step 3
Click
Bind Channels : Turn on this function, the camera connected to the PoE port is bound
●
to the channel corresponding to the PoE port. For example, if PoE 1 corresponds to the
channel 1, the camera connected to PoE 1 will be added to the channel 1 instead of
channel 2.
PoE Watchdog : When the PoE watchdog is successfully triggered, the PoE camera will
●
be reset.
In the bridge mode, PoE Watchdog cannot be turned on.
5.7.9 Updating Remote Devices
You can update the firmware of the connected network camera through online update or file
update.
Procedure
Select Main Menu > CAMERA > Camera List > Update.
Step 1
Figure 5-76 PoE
to turn on Bind Channels and PoE Watchdog as need
200
User's Manual