Cleaning The Rotary Brush - Silvercrest SHAZ 22.2 F7 Operating Instructions Manual

Cleaning the rotary brush

ATTENTION!
► Only use the appliance with the rotary brush
1) Remove the floor brush
(see section Dismantling the appliance). Turn the floor brush
down.
2) Unlock the rotary brush
finger towards the symbol
from the floor brush
Fig. 26
3) Pull the rotary brush
rotary brush
Fig. 27
SHAZ 22.2 F7
s from the suction pipe
a by sliding the rotary brush release
s (see Fig. 26).
1.
2.
a
out of the floor brush
a
slightly to make it easier to remove (see Fig. 27).
a
properly mounted.
f
(open). Remove the rotary brush holder
s
by the bristles. Turn the
or from the appliance
s
upside
o with your
p
GB │ MT │
115 ■