General Control; To Turn The Power On Or Off; Input Mode; Volume Control - Sharp PS-955 Operation Manual

Speaker system
Table of Contents

Advertisement

General control

 To turn the power on or off
Press and hold the ON / STAND-BY button to turn
the unit on. Press again to turn it off.
NOTE:
In USB / Bluetooth / AUDIO IN / LINE IN mode,
when the unit is not receiving any signal for around
15 minutes, it will automatically switch into standby
mode. Press and hold the ON / STAND-BY button
to turn on the unit again.
Please note that low volume setting in the audio
source may be recognized as "no audio signal".
This will affect the capability of signal detection
from the device and can also originate an automatic
switch into standby mode. If this happens please
reactivate the audio signal transmission or increase
the volume setting on the audio source player in
order to resume playback.
 Input mode
To change the function modes, press the INPUT
button repeatedly.
BLUETOOTH
TUNER
AUDIO IN
 Volume control
Rotate the VOL +/- knob on the unit to increase or
decrease the music volume.
 Bass control
Press the BASS button on the unit repeatedly to
select bass on or off.
 Flashing light
There are 8 modes for the DISCO LED lighting.
Press the LIGHT button to choose the light modes.
ROLLERZ
GLOW
LIGHTS OUT
Press and hold the LIGHT button to switch the
strobe light on or off.
PS-955 _smef_EN_CS4.indd 7
PS-955 _smef_EN_CS4.indd 7
USB
LINE IN
BLINK
INFINITY
PRISM
CLUB
E-7
 Dimmer
Press the DIMMER button repeatedly to select the
display background light intensity.
DIM OFF
DIM 1
 Equalizer
Press the EQUALIZER button repeatedly to select
the preset sound.
ROCK
LIVE
DANCE
POP
 Vocal cancel
Press the V. CANCEL button repeatedly to cancel
or resume the sound of music:
STEREO
V. CANCEL
 Muting
To mute the volume, press the
again to restore the volume.
 Recording
The unit can record tracks from other input modes
into the USB drive.
1.
Insert a USB drive into the USB terminal.
2.
Press the REC button to start recording.
3.
Play a track to be recorded from other input
modes (Bluetooth, Line in, Audio in, Tuner).
4.
Press the REC button again to stop recording.
Notes:
● Recording tracks from USB to USB is not
possible.
● Do not unplug the USB drive from the unit when
recording is in progress.
DIM 3
DIM 2
JAZZ
FLAT
L + L
R + R
button. Press it
2023-08-04 17:49:40
2023-08-04 17:49:40

Advertisement

Table of Contents
loading

Table of Contents