General Control - Sharp HT-SB400 Operation Manual

General control
HT-SB400
E-13
ON/STAND=BY -- V0L VOL+
• To turn the power on
Press the ON/STAND-BY button on the remote control or touch
anywhere on the display panel. All the indicators will be
displayed to indicate pad positions.
• The ON/STAND-BY indicator turns GREEN. tfthe power
does not turn on, check whether the power lead is plugged in
properly.
To set the speaker to stand-by mode:
• Press the ON/STAND-BY button again on the remote control
or touch ON/STAND-BY pad on the speaker.
The ON/STAND-BY indicator turns ORANGE.
• Display brightness control
Press the D_MMER/SENS ON/OFF button to adjust the
brightness of the display and sound mode indicator.
i Sound mode indicator and display bright.
operation.Display will off after 5 seconds_, without any button/pad
| Sound mode indicator and display dim.
L-Display will off after 5 seconds without any button/pad
operation.
• Volume auto fade-in
If you turn off and on the speaker with the volume set to 40 or
higher, the volume starts at 20 and fades in to the last set level
• Volume control
Speaker operation:
Touch VOL + pad to increase the I ="'. "."_: I I." :"_: I
volume and touch - VOL pad to _e-e
decrease the volume.
00,_01 _*02 ..... ,_59, ,60
Remote control operation:
Press the VOLUME + button to increase the volume and the
VOLUME - button to decrease the volume.
• Muting i"_/
The volume is muted temporarily when pressing
the MUTE button on the remote control. Press
again to restore the volume.
_/ iiii iiii _ _
• Preset sound mode
Speaker operation:
Touch a desired sound mode on the speaker
Remote control operation:
Press a desired sound mode on the remote control
NEWS TruSurround HD on for news
CINEMA/GAME TruSurround HD on for cinema/game
sound effect
SPORT TruSurround HD on for sport broadcasting
STANDARD TruSurround HD on for standard sound
effect