System Connections; Ac Connection (Charging The Battery) - Sharp PS-955 Operation Manual

System connections

 AC connection (Charging the battery)
1.
Plug the AC power lead into the AC socket at the back of the unit.
2.
Plug the AC power lead into a wall socket.
Notes:
● Unplug the AC power lead from the wall socket if the system will not be used for a prolonged period
of time.
● Use only the supplied AC power lead. Using other AC power lead may cause an electric shock or fire.
Before using this unit, it is recommended that the internal lithium-ion battery is fully charged. Plug in the
AC power lead and the battery starts charging. The display will show the battery charging status. When
fully charged, remove the AC power lead from the AC socket.
Full charge : Battery indicator – 3 bars light up.
When the battery charge is low, 'beep' sound is heard and the battery indicator will be blinking.
WARNING:
Do not attempt to change or replace the battery. This can only be carried out by a qualifi ed technician.
PS-955 _smef_EN_CS4.indd 6 PS-955 _smef_EN_CS4.indd 6
To AC socket
E-6
Wall socket
(AC 100 - 240V ~ 50/60Hz)
2023-08-04 17:49:40 2023-08-04 17:49:40