Table of Contents
Advertisement
General control
Display
Indicator
To turn the power on
Press the ON/STAND-BY button to turn the power on. The POWER
indicator lights up.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
The display indicator lights up, and the POWER indicator goes off.
Illumination light control
When the power is turned on, POWER and DISPLAY indicators light
up. To turn on/off the light, hold down the SNOOZE/DIMMER button
on the main unit or remote control for more than 2 seconds.
Volume auto fade-in
If you turn off and on the main unit with the volume set to 27 or higher,
the volume starts at 16 and fades in to the last set level.
POWER
Indicator
E Sound
Indicator
DK-UH2
Volume control
Main unit and Remote control operation:
Press the VOL (+ or -) button to increase or decrease the volume.
E SOUND control
When the E SOUND/DEMO button is pressed, the unit will enter the
E SOUND mode, and E SOUND indicator lights up. This mode adjust
low bass and high frequency automatically according to volume
input. To cancel this mode, press the E SOUND/DEMO button again.
0 ... 30
MAXIMUM
DK-UH2
DK-UH2(BK)
ENGLISH
E-8
Advertisement
Table of Contents
