Enhancing Your System - Sharp DK-V2 Operation Manual

Enhancing your system

DK-V2
Portable audio
player
Computer
To the line output socket
Audio Cable
(not supplied)
12
Listening to the sound from audio devices not
supporting Bluetooth wireless technology
(portable audio device, computer, etc.)
1
Connect the portable audio device, computer, etc. to the
AUX IN socket.
2
Press the ON/STAND-BY button to turn the power on.
3
Start playing on the source device.
If volume level of the connected device is too high, sound
distortion may occur. Should this happen, lower the volume of
the connected device.
4
Press the ON/STAND-BY button to turn off the unit.
Notes:
To prevent noise interference, place the unit away from the
television.
If connecting the speaker to a device with a built-in radio or tuner,
radio broadcasting cannot be received or sensitivity may be
reduced significantly.
If the source device has an extra bass function or equaliser
function, set them to off. If these functions are on, sound may be
distorted.
If the source device's headphone output has a line switch, better
sound will be heard if it is set to on. See the operating manual of
the source device.
If both the Bluetooth connected device and the one connected to
the AUX IN socket are played at the same time, only Bluetooth
sound can be heard. Turn off the Bluetooth pairing to listen to the
AUX IN sound.