Table of Contents
Advertisement
< When EXTERNAL IN is selected, the DSP and the AUTO button
do not work.
1
If a digital device is connected to DIGITAL IN terminals,
select desired decoding mode by pressing the AUTO
button.
Each time the AUTO button is pressed, the decoding mode is
changed as follows:
IN-AUTO (default):
The appropriate decoding mode is selected automatically.
Usually, select this.
IN-DTS:
Select this only when the input signal is DTS.
IN-PCM:
Select this only when the input signal is PCM.
< The AUTO button works only when the function is set to
VIDEO or CD and the digital input is selected.
< When IN-AUTO is selected, noise may be heard during
playback of a DVD recorded in DTS format. In this case, select
IN-DTS.
< If the selected decoding mode does not match with the input
signal, "DIGITAL" indicator will blink and no sound will be
heard.
2
Select the desired surround mode by pressing the DSP
button.
Each time the DSP button is pressed, the surround mode
changes.
Surround Mode 1
A
When Dolby Digital signals are input and IN-AUTO is selected,
the surround mode is set to DOLBY DIGITAL automatically.
If you press the DSP button, you can select one of the
following surround modes:
When the source is Dolby Digital EX:
DOLBY DIGITAL EX, DOLBY VS REF, DOLBY VS WIDE
When the source is Dolby Digital 5.1:
DOLBY DIGITAL, DOLBY PRO LOGIC IIx MOVIE, DOLBY PRO
LOGIC IIx MUSIC, DOLBY VS REF, DOLBY VS WIDE
When the source is Dolby Digital 2-channel:
DOLBY PRO LOGIC IIx MOVIE, DOLBY PRO LOGIC IIx MUSIC,
DOLBY PRO LOGIC, DOLBY VS REF, DOLBY VS WIDE
B
When DTS signals are input and IN-AUTO or IN-DTS is
selected, the surround mode is set to DTS or DTS-ES
automatically.
If you press the DSP button, you can select one of the
following surround modes:
When the source is DTS-ES:
DTS-ES, DOLBY VS REF, DOLBY VS WIDE
When the source is DTS:
DTS, DTS+NEO:6, DOLBY VS REF, DOLBY VS WIDE
C
When MPEG signals are input and IN-AUTO is selected, the
surround mode is set to MPEG automatically. The DSP button
doesn't work.
D
When the source is PCM (2-channel stereo) and IN-AUTO or
IN-PCM is selected, or when analog stereo signals are input,
you can select one of the following surround modes:
DOLBY PRO LOGIC IIx MOVIE, DOLBY PRO LOGIC IIx MUSIC,
DOLBY PRO LOGIC, DOLBY VS REF, DOLBY VS WIDE, DTS
NEO:6 CINEMA, DTS NEO:6 MUSIC, THEATER, HALL,
STADIUM
< When the DSP button is pressed once, the current surround
mode is displayed. Press the DSP button repeatedly to select
any other surround mode.
< When you press the DSP button, the sound is cut off for a
moment.
< When the surround back speaker is set to "None", Dolby Pro
Logic II appears instead of Dolby Pro Logic IIx.
< DOLBY DIGITAL or DOLBY DIGITAL EX can be selected only
during playback of a DVD disc recorded in DOLBY DIGITAL
format.
< The DSP indicator lights when THEATER, HALL or STADIUM is
selected.
(DSP: Digital Signal Processor)
31
Advertisement
Table of Contents
