Battery Installation; Remote Control Unit 1 - Teac AG-15D Owner's Manual

Av digital home theater receiver
Hide thumbs Also See for AG-15D:
Table of Contents

Advertisement

Battery Installation

1. Remove the battery compartment cover.
2. Insert two "AAA" (R03, UM-4) dry batteries. Make sure that
the batteries are inserted with their positive "+" and negative
"_" poles positioned correctly.
3. Close the cover.
Battery Replacement
If the distance required between the remote control unit and
main unit decreases, the batteries are exhausted. In this case
replace the batteries with new ones.
Precautions concerning batteries
< Be sure to insert the batteries with correct positive "+" and
negative "_" polarities.
< Use batteries of the same type. Never use different types of
batteries together.
< Rechargeable and non-rechargeable batteries can be used.
Refer to the precautions on their labels.
< When the remote control unit is not to be used for a long
time (more than a month), remove the batteries from the
remote control unit to prevent them from leaking. If they leak,
wipe away the liquid inside the battery compartment and
replace the batteries with new ones.
< Do not heat or disassemble batteries and never dispose of old
batteries by throwing them in a fire.
16

Remote Control Unit 1

How to use the Remote Control Unit
1
Turn on the main power of the component to be
operated.
2
Select the component to be operated by pressing the
corresponding REMOTE SELECT button for that
component.
When you want to control the TEAC AG-15D receiver, press
the RECEIVER button.
3
Point the remote control unit towards the remote
sensor on the front panel of the component you want
to control, and press the buttons to operate.
Buttons available for each device are listed on page 54.
< Even if the remote control unit is operated within the effective
range, remote control operation may be impossible if there
are any obstacles between the unit and the remote control.
< If the remote control unit is operated near other products
which generate infrared rays, or if other remote control
devices using infrared rays are used near the unit, it may
operate incorrectly. Conversely, the other products may
operate incorrectly.

Advertisement

Table of Contents
loading

Table of Contents