Table of Contents
Advertisement
Dynamic Range Compression
In many listening situations, you may find loud passages
objectionable. Adjusting this setting allows you to compress the
sounds into a range that you may find more suitable for a
particular listening situation. Dolby Digital satisfies these needs
through the dynamic range controlling.
Select one of the followings to fit the individual listening
situation of the audience.
During playback of DVD, press the DYNAMIC RANGE button
repeatedly until desired setting appears on the display.
DYNR 0.0 (off):
Audio with uncompressed dynamic range. Select this when
you don't want to compress the dynamic range.
DYNR 0.5:
Audio with partially compressed dynamic range.
DYNR 1.0:
Audio with fully compressed dynamic range.
< The default setting is "DYNR 0.0".
< This function is effective only when playing back a DVD disc
recorded in Dolby Digital format on the DVD player
connected via DIGITAL IN terminal. This control has no effect
on other discs.
< This function may not work with some discs.
36
Tuner
1
1
Select TUNER by turning the FUNCTION knob (or press
the TUNER button of the remote control unit).
Make sure the antennas have been connected (see page 4-5).
2
Select AM or FM by pressing the BAND button.
< If the BAND button is pressed while the source other than
TUNER was selected, the source will be switched to TUNER
automatically.
3
Press the TUNING MODE button to select the tuning
mode.
Each time the TUNING MODE button is pressed, the tuning
mode changes as follows:
Automatic tuning mode
("AUTO" indicator lights on the display.)
Manual tuning mode
(no indicator)
Preset tuning mode
("PRESET" indicator lights.)
Select the Manual tuning mode or the Automatic tuning
mode.
< When using the remote control unit, you can skip this step.
3
2
4
Advertisement
Table of Contents
