Operation
Adjusting the Airflow Rate/SMELL PROOF/CHILD LOCK Operation
Adjusting the airflow rate
You can adjust the airflow rate to increase your comfort.
■
To change the airflow rate setting
P ress ( • FA N J . • Each pressing of [•FANj changes the airflow rate setting in sequence.
• In DRY operation, the airflow rate setting cannot be changed.
• When the airflow is set to"�", quiet operation starts and noise
from the indoor unit will become quieter.
• In the quiet operation mode, the airflow rate is set to a weak level.
SMELL PROOF operation
The SMELL PROOF operation prevents unpleasant odour inside the indoor unit. This function is
available in both DRY and COOL operation.
■
To use SMELL PROOF operation
1. Before starting the operation, press ( • FAN ) to set to Auto .
2. Press (MooE ) to select the DRY or COOL operation .
� . Air starts circulating about 1 minute after the operation is started.
3. Press �
CHILD LOCK operation
Setting the CHI L D LOCK disables all the buttons except when ECONO and POWERFULL button
press together for about 5 seconds.
□
To set the CHILD LOCK :
• Press t;ECONO ) and � togetherfor about 5 seconds.
•
"wie"
will be displayed on the remote LCD.• I f a button is pressed while CHI L D LOCK is on,•
□
To CANCEL the CHILD LOCK
Press t; E C O N O ) and � together for about 5 seconds again.
" wie
"Disappears from the LCD.
NOTE
• Note on airflow rate setting
• At smaller airflow rates, the cooling effect is also smaller.
• Note on SMELL PROOF operation
• SMELL PROOF operation can prevent some odours, but not all.
• Notes on the operating conditions
• The air conditioner always consumes a small amount of electricity even while it is not operating.
• If you are not going to use the air conditioner for a long period, turn off the circuit breaker.
• Operation outside the humidity or temperature range described in the table may cause a
safety device to disable the system.
Mode
Operating conditions
Outdoor temperature: 20-(52-54
COOL
Indoor temperature: 18-32
Max. temperature varying model to model.
Indoor humidity: 80% max.
DRY
1-1�---- l-- - 1�.... I
Indoor unit quiet
However, if the POWER CHILL operation is started, air starts circulating
immediately.
C)*
°
°
C
Airflow rate 1-5 (Low to High)
If operation Is continued out of this range
• A safety device may activate to stop the
operation.
• Dew may form on the indoor unit and drip from it
when COOL or DRY operation is selected.
wie"
blinks.
6