Daikin F Operation Manual page 6

Operation
DRY. COOL. FAN
The air conditioner operates with the operation mode of your choice.
From the next time on, the air conditioner will operate with the same operation mode.
■
To start operation
1. Press �ocE) and select an operation mode. • Each pressing of the button changes the mode setting in sequence.
r-4:12:l-*-•7
L° RY COOL
[i57. • "
2. Press
■
To stop operation
3. Press �again.•
■
To change the temperature setting
8- •
Press A to raise the temperature and press v to lower the temperature.
4. Press
COOL operation
°
18-32 C
Default Set Temperature Setting : As per BEE regulation, whenever Air Conditioner will be switched
ON from the remote, the default set temperature will be set as mentioned in below table:
Mode Set temperature before remote switched OFF Set temperature after remote switched ON
If set temperature< 24
Cool
If set temperature >= 24
Note:
Whenever AC is switched OFF in dry mode and is switched ON from remote, air conditioner will
start in Cool mode and then DRY mode selection can be done using the MODE button.
STREAMER Operation
The absorption power of the accessory filter and the decomposition power of the streamer discharge combine to
reduce unpleasant odours and viruses.cleaning the air in the room.
■ T o start o p e rat i o n
1. Press C'i«i7 .
When long press(duration defined .z:5sec) the "COANDA / STREAMER"KEY, then STREAMER function will be enabled
and respective symbol glow on remote LCD.
■ T o st op o pe ra t i o n
1 . Pr es s
Again long press(duration defined2: 5sec) the "COANDA/STREAMER"KEY, then STREAMER will be get disabled
and respective STREAMER symbol disappeared from remote LCD.
NOTE
■
Note on COOL operation
• This air conditioner cools the room by releasing heat in the room outdoors. Therefore, cooling performance may fall in higher
outdoor temperatures.
■
Note on DRY operation
• Eliminates humidity while maintaining the indoor temperature as much as possible. It automatically controls temperature and
airflow rate, so manual adjustment of these function is unavailable.
■
Note on FAN operation
• This mode is valid for fan only.
■
Note on FAN operation
• For cooling: 26-28'C
■
What Is streamer discharge?
• This is a type of plasma discharge comprising high-speed electrons with a high oxidative capacity that is released within
the unit. It decomposes odours and harmful gases.
(The high-speed electrons are generated and then adsorbed within the unit to ensure your safety.)
• The streamer discharge may generate a hissing sound, however, this does not indicate a defect.
■
Note on FLASH STREAMER AIR PURIFYING operation
• When airflow is weak during operation, the streamer discharge may stop temporarily to prevent the emission of trace
amounts of ozone from the air outlet.
5
/ STREAME� O�eration
FANJ
is displayed on the LCD and The OPERATION lamp lights green.
(;]II "
"mm"
disappears from the LCD and Then OPERATION lamp goes off.
DRY or FAN opera tion
The temperature setting cannot be changed.
°
C
·c
COANDA
STREAMER
C � l .
STREAMER
Default set temperature will be 24
Default set temperature w ill remain same
as set prior to remote switched OFF.
·c.