Installation Instructions; Dimension Data; Location - Gree GMV-ND09A/A-T(U) Owner's Manual

(1) Use copper wire only as unit's power cord. Operating temperature should be within its rated value.
(2) If the power cord is more than 15 m (49-1/4 ft.) long, please increase properly the sectional area of power cord to
avoid overload, which may cause accident.
(3) Above selection requirements: Power cord size is based on BV single-core wire (2~4pc) at 40° (104°F) ambient
temperature when laying across plastic pipe. Air switch is D type and used at 40°C (104°F). If actual installation
condition varies, please lower the capacity appropriately according to the specifications of power cord and air
switch provided by manufacturer.
(4) Install cut-off device near the unit. The minimum distance between each stage of cut-off device should be 3 mm
(1/8 inch) (The same for both indoor unit and outdoor unit).

4 Installation Instructions

4.1 Dimension Data

Model
GMV-ND09A/A-T(U)
GMV-ND12A/A-T(U)
GMV-ND18A/A-T(U)
GMV-ND24A/A-T(U)
GMV-ND30A/A-T(U)
GMV-ND36A/A-T(U)
GMV-ND42A/A-T(U)
GMV-ND48A/A-T(U)
GMV-ND54A/A-T(U)

4.2 Location

4.2.1 Installation Site
 A place where cool air can be distributed throughout the room.
 A place where condensation water is easily drained out.
 A place that can bear the weight of indoor unit.
 A place which is easy for maintenance.
W
18-1/8(460) 21-1/4(540)
18-1/8(460) 21-1/4(540)
18-1/8(460) 21-1/4(540)
18-1/8(460) 21-1/4(540)
18-1/8(460) 21-1/4(540)
21-1/4(540) 21-1/4(540)
21-1/4(540) 21-1/4(540)
24-7/8(630) 21-1/4(540)
24-7/8(630) 21-1/4(540)
Fig.4.1
D
imension
D H
43-1/2(1105)
43-1/2(1105)
43-1/2(1105)
43-1/2(1105)
43-1/2(1105)
48-1/4(1224)
48-1/4(1224)
48-1/4(1224)
48-1/4(1224)
8
GMV DC Air Handler
Unit: inch (mm)
A
11-5/8(295) 16-3/4(426)
11-5/8(295) 16-3/4(426)
11-5/8(295) 16-3/4(426)
11-5/8(295) 16-3/4(426)
11-5/8(295) 16-3/4(426)
11-5/8(295) 20(508)
11-5/8(295) 20(508)
11-5/8(295) 20(508)
11-5/8(295) 20(508)
B