Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS
WARNING :
▪ Observe all electrical codes and ordinances.
▪ Do not use damaged or non-standard power cords.
▪ Use caution during installation.
▪ Proper installation is the responsibility of the installer. Incorrect installation will void the warranty.
▪ All parts described must be used without any substitution.
REQUIRED TOOLS
Ruler or measuring tape
CORD WINDING HOOKS INSTALLATION
1. Fasten the power cord winding hooks to the back
of the appliance with the screws provided (the di-
rection of the hooks is shown in Figure 2).
2. Wind the power cord around the hooks.
Hook
(pointing up)
Screws
Hook
(pointing down)
FIGURE 2
INSTALLATION GUIDE
Phillips-head screwdriver
Scissors or x-acto knife
WINDOW KIT INSTALLATION
Here are the detailed instructions for installing the
window kit in double-hung or sliding windows. For
some windows, such as a casement window, you
will have to improvise several steps of the installa-
tion, as each window is different.
1. Cut the foam seal B (adhesive type) to the re-
quired length and attach it horizontally or verti-
cally depending on your type of window.
Foam
seal B (2)
FIGURE 3
Saw
Pencil
Foam
seal B (2)
9
Advertisement
Table of Contents
