Advertisement
Available languages
Available languages
ENglish
PROBlEM
Unit will not start.
Battery pack will not charge.
Unit shuts off abruptly.
8
TROUBLESHOOTING
CAUsE
Battery pack not installed properly.
Battery pack not charged.
Internal components too hot.
Brushes worn out.
Battery pack not inserted into charger.
Charger not plugged in.
Surrounding air temperature too hot or
too cold.
Battery pack has reached its maximum
thermal limit.
Out of charge. (To maximize the life of
the battery pack it is designed to shut off
abruptly when the charge is depleted.)
CORRECTiON
Check battery pack installation.
Check battery pack charging requirements.
Allow tool to cool down.
Have motor replaced by an authorized CRAFTSMAN service center.
Insert battery pack into charger until LED illuminates.
Plug charger into a working outlet. Refer to Important Charging
Notes for more details.
Move charger and battery pack to a surrounding air temperature of above
40 °F (4.5 °C) or below 104 °F (40 °C).
Allow battery pack to cool down.
Place on charger and allow to charge.
Advertisement
