Double Insulated Rules For Safe Operation Introduction and Warranty Table of Contents Operation ® Thank You for Buying A Craftsman Sander/Polisher Maintenance Repair Parts Sold by SEARS, ROEBUCK AND CO. Hoffmsn Estates, IL 60179 U.S.A. 972000-136 8-00 Printed In U.S,A.
RULES FOR SAFE OPERATION DOUBLE INSULATION is a safety concept in electric power IMPORTANT -- Servicing of a tool with double insulation tools, which eliminates the need for the usual three wire requires extreme care and knowledge of the system and grounded powercord and grounded supplysystem.
The smaller the 34. WHEN SERVICING USE ONLY IDENTICAL gage number, the heavier the cord. CRAFTSMAN REPLACEMENT PARTS. 22. OUTDOOR USE EXTENSION CORDS. When tool 35. pOLARIZED PLUGS.To reduce the dskof electdc is used outdoors,use only extension cords suitable shock, this tool has a polarized plug (one blade is for use outdoors.
RETURN IT TO THE NEAREST SEARS STORE IN THE UNITED STATES and Sears will repair it, free of charge. Ifthis Craftsman Sander/Polisher is used for commercial or rental purposes this warranty applies for only 90 days from the date of purchase.
OPERATION WARNING: WARNING: If any parts are missing, do not operate this tool until the Always wear safety goggles or safety glasses with side shields when operating your sander/polisher. Failure to missing parts are replaced. Failure to do so could result in possible serious personal injury.
OPERATION WARNING: Your sander/polisher should never be connected to power supply when you are assembling parts, making adjustments, assembling or replacing sanding discs or bonnets, cleaning, or when not in use. Disconnecting sander/polisher will prevent accidental starting that could cause serious personal injury. LOCK-ON BUTTON See Figure 2.
OPERATION SANDING DISC SELECTION Selecting the correct size grit and type sanding disc is an SPANNERWRENCH extremely important step in achieving a high quality sanded finish. Aluminum oxide, silicon carbide, and other synthetic abrasives are best for power sanding. Natural abrasives, such as flint and garnet are too soft for economical use in power sanding.
OPERATION PREPARING FOR OPERATION For ease of operation, this tool has a front auxiliary handle and rear handle. See Figure 1. This provides for two-hand operation, which is necessary in order to maintain proper control and keep both hands clear of the sanding disc and sanding area.
OPERATION WARNING: Do not wear loose clothing or jewelry when operating this tool. They could get caught in moving parts causing serious injury. Keep head away from sanderlpolisher and sanding or polishing area. Hair could be drawn into sanderlpolisher causing serious injury. INSTALLING POLISHING BONNETS...
MAINTENANCE WARNING: WARNING: When servicing use only identical Craftsman replacement Always wear safety goggles, or safety glasses with side parts. Use of any other parts may create a hazard or shields dudng power tool operation or when blowing dust. cause product damage.
CRAFTSMAN SANDER-POLISHER m MODEL NUMBER 315.115030 SEE NOTE "A", Page 13 Page 12...
CRAFTSMAN SANDER/POLISHER -- MODEL NUMBER 315.115030 in all correspondence regarding your CRAFTSMAN SANDER/POUSHER or when ordering repair parts. The model number will be found on a plate attached to the motor housing. Always mention the model number BACK PAGE FOR PARTS...
For repair of major brand appliances in your own home... no matter who made it, no matter who sold it! 1-800-4-MY-HOME s" Anytime, day or night (1-800-469-4663) www.sears.com To bring in products such as vacuums, lawn equipment and electronics for repair, call for the location of your nearest Sears Parts & Repair Center. 1-800-488-1222 Anytime, day or night www.sears.com...