Download Print this page

Craftsman CMCW220 Instruction Manual page 7

20v max* 5" (127 mm) random orbit sander
Hide thumbs Also See for CMCW220:

Advertisement

Available languages

Available languages

MAINTENANCE

WARNING: To reduce the risk of serious personal
injury, turn unit off and remove the battery pack
before making any adjustments or removing/installing
attachments or accessories. An accidental start‑up can
cause injury.
Accessories

WARNING: Since accessories, other than those offered by
CRAFTSMAN, have not been tested with this product, use of
such accessories with this tool could be hazardous. To reduce
the risk of injury, only CRAFTSMAN recommended accessories
should be used with this product.
Recommended accessories for use with your tool are available
at extra cost from your local dealer or authorized service
center. If you need assistance in locating any accessory, please
contact CRAFTSMAN, call 1-888-331-4569.
Versatrack™ (Fig. G)

WARNING: To reduce the risk of serious personal
injury, turn unit off and remove the battery pack
before making any adjustments or removing/installing
attachments or accessories. An accidental start‑up can
cause injury.

WARNING: To reduce the risk of serious personal injury,
do not use a damaged Versatrack™ hang hook or Versatrack™
Trackwall. A damaged Versatrack™ hang hook or Versatrack™
Trackwall will not support the weight of the tool.

WARNING: To reduce the risk of serious personal injury,
ensure the screw holding the Versatrack™ hang hook is
securely tightened.

WARNING: To reduce the risk of serious personal injury,
DO NOT suspend tool overhead or suspend objects from the
hang hook. ONLY suspend tool on the Versatrack™ Trackwall
using the hang hook.

WARNING: Ensure that the tool weight does not exceed
the maximum rated weight for the selected Versatrack™ hook.

WARNING: When hanging objects on a Versatrack™
Trackwall rail, adequately space the tools in order to not
exceed 75 lb (35 kg) per linear foot.
iMPORTANT: When attaching the Versatrack™ hang
hook, use only the screw that is provided. Be sure to
securely tighten the screw. Versatrack™ accessories
mount compatible tools securely to the Versatrack™
Trackwall system.
1. Turn tool off, remove accessories, and disconnect
power source.

CAUTION: Any product with exposed cutting teeth must
have them covered securely if it is to be on the Versatrack™
Trackwall.
2. Attach the hang hook
a. Place the Versatrack™ hang hook onto the mounting
location at the base of the tool.
b. Use a screwdriver to secure the hang hook with the
provided screw
 14 
. Do not use any other screw for this.
NOTE: Versatrack™ accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center. If you need assistance in locating any
accessory, please contact CRAFTSMAN, call 1-888-331-4569.
Cleaning

WARNING: Blow dirt and dust out of all air vents with
clean, dry air at least once a week. To minimize the risk of eye
 13 
on the tool.
injury, always wear ANSI Z87.1 approved eye protection when
performing this.

WARNING: Never use solvents or other harsh chemicals
for cleaning the non‑metallic parts of the tool. These
chemicals may weaken the plastic materials used in these
parts. Use a cloth dampened only with water and mild soap.
Never let any liquid get inside the tool; never immerse any part
of the tool into a liquid.
Repairs
The charger and batteries are not serviceable. There are no
serviceable parts inside the charger or battery pack.

WARNING: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (including brush
inspection and replacement, when applicable) should be
performed by a factory service center or an authorized service
center. Always use identical replacement parts.
Register Online
Thank you for your purchase. Register your product now for:
• WARRANTY sERViCE: Registering your product will help
you obtain more efficient warranty service in case there is a
problem with your product.
• CONFiRMATiON OF OWNERshiP: In case of an
insurance loss, such as fire, flood or theft, your registration of
ownership will serve as your proof of purchase.
• FOR YOUR sAFETY: Registering your product will allow
us to contact you in the unlikely event a safety notification is
required under the Federal Consumer Safety Act.
Register online at www.craftsman.com/account/login.
Three-Year Limited Warranty
For warranty terms, go to www.craftsman.com/
support/warranty.
To request a written copy of the warranty terms, contact:
Customer Service at CRAFTSMAN, 701 East Joppa Road,
Towson, MD 21286 or call 1‑888‑331‑4569.
lATiN AMERiCA: This warranty does not apply to products
sold in Latin America. For products sold in Latin America,
see country-specific warranty information contained in
the packaging, call the local company, or see website for
warranty information.
FREE WARNiNg lABEl REPlACEMENT: If your warning
labels become illegible or are missing, call 1‑888‑331‑4569
for a free replacement.
ENglish
7

Advertisement

loading