Loading The Batteries - Panasonic Omnivision PV-9405S Operating Instructions Manual

Congratulations
on your purchase of one of the most sophisticated and
reliable products on the market today. Used properly,
it will bring you and your family years of enjoyment.
Please fill ín the information below. The serial number
is on the tag located on the back of your VCR.
* Date of Purchase
* Dealer Purchased From
* Dealer Address
«Dealer Phone No. 1 1 1.
* Model No. PV-9405S SS
e Serial No.
Accessories
O Remote Control
VSQS1597
O Batteries 2 "AA"
CJ RF Coaxial Cable
VJASO0196
Loading the Batteries
1) Open the cover.
2) Insert the
batteries as
marked.
3) Close the cover.
L] Battery replacement caution
* Do not mix old and new batteries.
* Do not mix alkaline with manganese batteries.
4
CABLE TV
OUTDOOR ANTENNA
-
Tun
Pid
>ч"
„=
INDOOR ANTENNA
Disconnect antenna
or cable from TV and
connect to VCR.
IN FROM/ ANT
OUT TO TV
3 ch 4
channel 3 or 4 (not
2 Set VCR Output to
an active station).
2
Connect VCR
to TV with RF
VHE/UHE Coaxial Cable.
ТМ
Tune TV to VCR output channel
the same one you set in step 3.
WARNING
When using "Nut type" RF coaxial cables, tighten with
fingers only. Overtightening may damage terminals.