Panasonic Omnivision PV-9405S Operating Instructions Manual page 8

Playback a lape
A check list before you begin.
O All connections are made.
O TV and VCR are plugged in.
О TV is turned on and set to the VCR channel (CH З or 4).
O Remote is in VCR mode.
Insert a cassette.
* VCR power comes on and VCR
appears on Multi Function Display. i
Press PLAY.
* Playback begins if cassette has
no record tab.
W To Find a Particular Scene
Forward Search --» Press FF.
Reverse Search --» Press REW.
Ш For Slow Motion --> Press SLOW.
(To release, press SLOW.)
lll For Still (Freeze) picture --> Press PAUSE.
(To release, press PAUSE.)
lll For Frame by Frame picture --> Press SLOW in Still mode.
(To release, press PAUSE.)
* To reduce pict ise, "M | Tracking Control" x e е | picture noise, see "Manual Tracking Control" on
* After the VCR is in Still or Slow mode for 3 minutes, it will switch to
Stop mode automatically to protect the tape and the video head.
REW
ІШ To stop --> Press STOP.
Ш To rewind tape --> Press REW in Stop mode.
ШЇ To fast forward tape --> Press FF in Stop mode.
Ш To eject tape --> Press EJECT on the remote or
STOP/ EJECT on the VCR.
Playback using VCR controls
1 insert a cassette.
2 Press PLAY.
€ To prevent tape jam
Inspect your cassette tapes and
remove any loose or peeling labels.
Press to stop and/ or eject tape.