Panasonic Omnivision PV-9405S Operating Instructions Manual page 16

аре Operation
VHS Index Search System
Each time recording is made, an invisible index mark is placed on the tape. When timer recordings are made, Program
index and information are also included. These index marks can be used to access or scan recordings.
Direct Access (For normal and /or timer recordings)
Go directly to desired recording.
* if there are no timer recordings on the
Program Index List, go to step 3.
Display INDEX.
1) Press AV to select.
2) Press > to display.
* This screen appears only if
there are timer recordings.
SELECT SEARCH MODE
INDEX SEARCH
PROGRAM INDEX SEARCH
e A Y KEY
SET :» KEY
END : INDEX KEY
INDEX Select the recording number.
© © (3| Press NUMBERED
keys.
* To calculate number,
see below.
Press FF or REW.
* When search is
finished, playback
begins.
INDEX SEARCH 04
Ш To Calculate Index Number
Example 1:
If you are watching recording 4 and you want to watch recording 2,
enter 3 in step "3" and press REW.
COS МЦ
112 [з [4 [51] e [7
Example 2:
If you are watching recording 2 and you want to watch recording 6,
enter 4 in step "3" and press FF.
"A A A
ala |за 151 e {7 |
NOTE: 4 indicates start points of each recording.
16
4 REW
2 SELECT/
SET
A:PLAY
Y: STOP
ЬЕР
4 FF
3
NUMBERED
keys
1 INDEX
* Make each entry within 10 seconds, or
the Index Search mode will be canceled.
* If Direct Access or Index Scan is started
very close to an index mark, that index
mark may not be counted in the search.