Panasonic Omnivision PV-9405S Operating Instructions Manual page 19

opying Your lapes (Dubbing)
Connections you'll need to make.
IN. FROM ANT. : IN FROM. ANT.
Playing (Source) VCR Recording (Editing) VCR
— —— ————— | Insert pre-recorded - | Insert blank tape
MM tape. | ISN with record tab.
Q Select LINE mode.
A Press INPUT.
o (See "Selecting the
Input Mode" below.)
3 Put in Standby mode. REC pause | Put in Standby mode.
C», and
Press PLAY, then
aa
Press REC, then
© PAUSE at starting point. PAUSE immediately.
PAUSE Start dubbing.
Stop dubbing. Stop dubbing.
B To Monitor Dubbing on Your TV ш Selecting the Input Mode
Q
о
UO
=
m
(©
<
о
c
m:
mr
t
©
Ф
o
O
c
С
S
pa]
(O
~~
Start dubbing.
Press PAUSE.
1 Turn your TV on and tune to the Recording Method 1:Press INPUT.
VCR channel (CH3 or CH4).
Channel Number <--> LINE
2 | Method 2: Press CH A/¥.
Set the VCR/ TV Selector on the Recording Display will change as below.
VCR to "VCR."
тебеа
(CABLE) (TV)
; : | ИМЕ+—+125 or 69
| Note | Dubbing tapes protected with Copy Guard will have * "L" lights on Multi-Function Display (about 4 sec.)
poor quality results. when LINE is selected.
Caution: Unauthorized exchanging and/or copying of copyrighted recordings may be copyright infringement.