Panasonic Omnivision PV-9405S Operating Instructions Manual page 9

песога On а таре
*Important: Y
If the remote control POWER, ACTION, Check list before you begin.
PROG, CH A/F, INDEX, NUMBERED O Ail connections are made.
keys, INPUT, TAPE POSITION, or ADD/ П ту is turned on and set to the VCR channel (CH 3 or 4).
DLT button does not work when pressed, — [7] cassette with record tab in place
press the VCR button on the remote and L] Remote in VCR mode :
try the button again.
insert a cassette.
• VCR power comes on
automatically.
D
t)
<
т
ш
O
&
2)
©
©
o
=
=
-
©
Select Channel.
Press CH À/W* or NUMBERED keys.
* To select "LINE", see page 19.
* To select channels over 100,
first press 100 key, then enter
remaining two digits.
£0 — Select Recording speed. Recording speed.
C (See page 28.)
Press SPEED.
VCR/TV • SP = Standard Play
LP = Long Play
SLP = Super Long Play
• Selected speed is displayed on TV
screen and Multi Function screen and Multi Function Display. —
© Start Recording.
Press REC.
* To edit out unwanted portions,
press PAUSE to pause and
resume recording.
l To stop --> Press STOP
Ш One Touch Recording
Press REC repeatedly to set the recording length
(30 min. - 4 hours).
• The VCR turns itself off at a preset time.
ap Rec —0:30 — 1:00
4:00 4— 3:004 — 2:00 4— 1 oe
lll Record One Program While Watching Another
Press VCR/TV--»"VCR" disappears on Multi Function Display
--» Select Channel at the TV.
lll Selecting Channel at the VCR
Press VCR/TV-->"VCR' appears on Multi Function Display
--> Select Channel at the VCR.
Multi Function Display
4 TRACKING >
You can operate on the VCR
4 verm 1 2
After the VCR has been in Pause mode
for 5 minutes, it will stop automatically
to protect the tape and the video head.
W Press to stop.