Recording Over Existing Scenes-Av Insert Editing (Mv430I Only).85 - Canon MV430 Instruction Book

Recording Over Existing Scenes — AV Insert Editing (MV430i only)
You can insert new scenes from your VCR or other camcorder onto your pre¬
recorded tape using the MV430i's analog line-in or DV in terminals. Original
video and audio will be replaced with the new video and audio.
Scene to be inserted
Insert end point
Before inserting
The tape in the
camcorder
After inserting
The lape in the
camcorder
The video and audio of the new scene replace that of the old
OUTPUT
S-150 S-video Cable
STV-250N Stereo Video Cable
Make sure the AV/headphone terminal is set to AV through the menu (QD 30)
If PHONES appears in the display, switch the terminal.