Canon MV430 Instruction Book page 91

E Notes:
• When you add sound using the built-in microphone make sure not to connect
any cables to the MIC terminal.
• To use your TV to monitor video, connect the S-video terminal (CO 32) or the
AV terminal (use only the video plug) to your TV. You can monitor the sound
with headphones only when using the S-video terminal (CO 30).
Preparations _
Turn the camcorder's POWER switch to PLAY (VCR) and move the camcorder's
TAPE/CARD switch to TAPE. Load a recorded cassette.
• Make sure the REC/SAVE tab on the cassette has been slid to REC (closed
position).
Dubbing
Do not connect/disconnect any cables to/from the camcorder when dubbing audio
or preparing to dub audio.
1. Open the menu and select VCR SET UP.
2. Select AUDIO DUB.
3. Select AUDIO IN or MIC. IN and close the menu.
o o o