Canon MV430 Instruction Book page 94

Selecting audio output channels
nn
When you play back a tape whose audio has been recorded on multiple channels,
you can change the output channels of that sound.
2
))
MENU
(CP 37)
1. Load a tape recorded with multiple-channel audio.
2. Open the menu and select VCR SET UP. Then select OUTPUT CH,
set it to the desired setting and close the menu.
• Refer to the following list.
OUTPUT CH setting
Played back sound
Tape recorded with
stereo sound
Tape recorded on
multiple channels
L/R
L+R channels main + sub
L/L
L channel only
main only
R/R
R channel only
sub only
94