Canon MV430 Instruction Book page 59

Faders
Fade Trigger (FADE-T)
When you start recording,
the scene gradually
fades in from a ^2
black screen. Hh
When you stop
recording, it gradually fades
Wipe (WIPE II)
When you start recording, the picture
begins as a thin vertical line in
the center of the
screen which
gradually expands H
sideways until it
fills the whole
of the screen.
pt. 1
*
When you end a
scene, the image is wiped
from both sides of the screen.
Horizontal Wipe (WIPE =)
When you start recording, the picture
begins as a thin horizontal line in the
centre of the screen
which gradually H
expands upwards V
and downwards
until it fills the
whole screen.
When you end
a scene, the image is wiped
from the top and bottom of
screen.
Mosaic Fade (M. FADE)*
Blurs the image by enlarging the size of some pixels. The image
appears as increasingly large squares of colour as it fades out, and
smaller squares when it fades in.
* Available during TAPE PLAY (MV430i: TAPE PLAY (VCR)) mode
only.
59